Friday, January 30, 2009
Tuesday, January 20, 2009
FW: Ti Booster technology
Makino has recently developed Titanium booster technology
for Makino sinkers at the request of a major aerospace
manufacturer. In order to use it, the EDM machine must have a generator booster
that provides an additional 60 amps to the existing standard generator. What's
new is the technology, or machining conditions, that provide the burn parameters
for the machining - On time, Off time, Servo, Amperage, etc. The new technology
is currently for high speed roughing only, and provides material removal rates
of about 2 grams per minute. This is about 70-80% faster than previous
technologies. Makino is currently developing finish settings for this new
technology that are expected to be able to achieve finishes down to less than 2
micronRa, or 75 microinchRa. This technology will be available for most Makino
sinker EDMs. We'll be broadcasting an online seminar on our Titanium booster technology this Thursday, January 22, 2009. If you'd like to attend and learn more about these advancements in titanium machining, you can register for free here. Thanks for reading everybody, hope to see you at this weeks seminar!
Thursday, January 08, 2009
Happy New Year to all you EDMers out there. Now that
the holidays are over, and we get back into the swing of things, I want to thank
everyone who has visited EDMMatters over the last 27 months. I will be posting
several new items in the coming weeks, touching on Wire EDM, Sinker EDM, Fine
Hole EDM, and a new Topaz EDM wire from SST Consumables, developed exclusively
for Makino and SST by Birkenhoff. Pretty much anything EDM. Welcome back to
the grind, have a safe and hopefully prosperous New Year, and visit EDMMatters
regularly to get new and updated information on Makino EDM products, services,
process ideas, and customer experience. Please feel free to post questions,
comments, or new thoughts on the blog as you visit.
Tuesday, November 11, 2008
Makino EDM introduced some new technology at IMTS. For Wire EDM, we
presented the new DUO43 and DUO64 WEDMs. These machines will replace
the SP series, and have several improvements of note. The DUO series
machines are about 20% smaller in footprint than the SPs were, but
retain the same X, Y, Z, U, V axis travels. The bed of the machines have
been redesigned to incorporate the clean and dirty tanks into the same
platform as the machine tool. New technologies will give the machine
about a 20% increase in performance in many applications, and we have
specifically designed .012" wire technologies to address both speed and
performance with larger diameter wires. This is the only WEDM made that
offers a choice of wire guide systems, either our proven Split
Precision V Guides or the new PICO Precision Guides for small
hole/close pitch threading and precision land/taper work for fine
blanking and precision stamping dies.
On the sinker side, our
newest advancements are a titanium specific generator, and Super Spark
Graphite. The titanium generator allows high speed burning of titanium
parts, specifically at the request of a major aerospace manufacturer,
while maintaining surface integrity of the parts being machined. Super
Spark Graphite is a new technology that drastically reduces burn time
in deep cavities, while reducing electrode wear. In some cases, Super
Spark Graphite allows EDMing of details that were impossible to do with
older, standard technologies. One example of this that was on display
at IMTS is a blind hole machined with a 5mm (0.197") square electrode
to a depth of 200mm (7.874"). The fact that this can even be done at all is
amazing, but it took only 20 hours (with no external flushing) and had
around 20% wear on the roughing electrode (1st of 3 electrodes total).
For
more information on these and other technological advancements in EDM
from Makino, go to www.makino.com, or
contact me at jeff.kiszonas@makino.com.
Thursday, October 09, 2008
This came into our applications department recently from a new EDGE2 customer:
"Thanks
for sending the test document on the Ultra-fine Circuit program. It was
a big help, along with the input on looking at the block by block
function in the diagnose screen. I now have a lot better understanding
of how time control breaks down into segments and how much time I'm
actually spending on each portion of each process. It was also
interesting on how MC Method 13 has 3 segments to each process and
Method 93 has 7 segments. It still amazes me on how the operator has
virtually an unlimited amount of options when it comes to programming.
The amount of information that's available to monitor every portion of
the burn is a big benefit that was unheard of with our old machine.
Every day I'm more and more convinced we made the right decision in
going with Makino. Thank You."
This customer does a lot of
carbide punch back-burning, and has seen a dramatic decrease in
processing time on the Makino EDGE2 as compared to the other sinker
they had been using. They also do a lot of carbide face details, and
have seen improvements in surface finish, surface integrity, and
geometric accuracy in these applications. We did a webinar on the back-burning process back in October 2007, entitled Back Burning Punches. This webinar, along with our
entire webinar archive, can be viewed for free at www.makino.com/library.
Thursday, September 18, 2008
Makino introduced a new wire EDM at IMTS--the DUO series. I'll be giving a webinar on Sept. 25 at 11am ET talking about the new machines, and will be available for Q&A after. Plus we'll have the first two DUO users on hand talking about their experience.
Register to attend at www.makino.com/events, or check out more on the DUO at www.makino.com/DUO.
Hello everyone! I want to provide an update of where Makino is with surface integrity testing for aerospace. Since the last webinar in January 2008, we have added Inconel 718 alloy to the testing, and have also added sinker test results for all alloys tested so far. These include 6061-T6 aluminum, 718 alloy Inconel, 17-4PH stainless, and 6Al-4V titanium. These materials were machined with wire EDM, using brass and coated wires with one, two, and three pass machining. Sinker EDM tests were done with a widely recognized, premium grade of EDM graphite to rough, semi-finish, and finish states.
The test results on all alloys have been very impressive. If you would like a free copy of all three lab test reports, please email me, and I will be happy to send electronic versions for review. Also, if anyone would like to work with Makino on more specific tests (materials, geometries, coupons, or additional testing such as tensile strength after EDM) contact me to set things up. I can be reached at jeff.kiszonas@makino.com or 248-232-6208.
Tuesday, August 19, 2008
If you plan on attending IMTS 2008 in
Chicago, IL between September 8 and 13, check out what Makino will be showing at
www.makino.com/IMTS. Wire and Ram EDMs
and the V22 VMC will be on display at booth D-4101 in the Lakeside Hall, and we
will be presenting HMCs and VMCs in the main Makino booth, A-8301 in the South
Hall. Stop by the EDM booth any time during the show to say "Hi", and discuss
your EDM needs with our knowledgeable and experienced EDM Applications
Engineers.